Ajax en54 i/o (2x2) jeweller | 124590.280.wh1 | 2 ingressi e 2 uscite
Il modulo wireless ajax en54 i/o (2x2) jeweller, in colore bianco, consente l’integrazione rapida e sicura di dispositivi di terze parti in un sistema antincendio ajax, come luci di emergenza, serrature elettriche o sistemi di ventilazione. dotato di due ingressi e due uscite, supporta il protocollo jeweller per comunicazioni stabili fino a 1.700 m, funziona con batterie interne per 5 anni e si configura in pochi minuti via app ajax
- 2 Ingressi e 2 uscite configurabili via app
- Comunicazione radio jeweller fino a 1.700 m
- Compatibilità con dispositivi nc, no, eol, 2eol e 3eol
- Autonomia fino a 5 anni, nessuna alimentazione esterna richiesta
- Conforme en 54-18 e en 54-25
- Installazione semplice con scansione qr e cavi ad alto o basso profilo
Advanced sabotage protection
Block encryption featuring a dynamic key
Remote control and configuration in ajax apps
Scheda tecnica
- Marca: Ajax
- Codice produttore: AJ-124590
- Colore: bianco
- Frequency bands: 866.0–866.5 mhz 868.0–868.6 mhz 868.7–869.2 mhz 905.0–926.5 mhz 915.85–926.5 mhz 921.0–922.0 mhz depends on the sales region.
- Maximum effective radiated power (erp): up to 20 mw automatic power control to reduce power consumption and radio interference.
- Radio signal modulation: gfsk
- Radio communication range: up to 1,700 m up to 5,550 ft between the device and control and indicating equipment (cie) or a range extender in an open space.
- Encrypted communication: all stored and transmitted data are protected by block encryption featuring a dynamic key.
- Frequency hopping: to prevent radio interference and jamming.
- Number of input lines for third-party devices: 2
- Input terminals: input 1, input 2 - inputs for connecting third-party wired devices shield - common input for connecting shields of the cables that connect third-party wired devices
- Type of connection: no, nc, eol, 2eol, 3eol
- Eol resistance: 0.47 kω, 1.2 kω, 2.7 kω, and 6.2 kω resistors four resistors for each input are included in the complete set.
- Length of wired connection to third-party devices: up to 100 m up to 325 ft when 2×1.5 mm2 (16 awg) fire-resistant cable is used.
- Cross-sectional area of the cable: 0.4–2.5 mm² (21–13 awg)
- Outputs terminals: output 1, output 2 - relay outputs for connecting third-party wired devices.
- Ac operating range: 10-250 v~, 5 ma to 10 a (resistive load)
- Dc operating range: 10-30 v⎓, 5 ma to 5 a (resistive load)
- Operating mode: pulse bistable
- Pulse duration: from 1 s to 1 h 30 min pulse duration can be configured for pulse mode in ajax apps separately for each relay.
- Automation scenarios: the scenarios can be configured in ajax apps separately for each relay.
- Fail-safe mode: if the module is offline, discharged, or has hardware problems, it activates the connected devices automatically.
- Installation recommendations: the device is designed for indoor use only.
- Tamper button: notifications of attempts to detach the module from the surface or open the front lid.
- Protection against spoofing: device authentication
- Connection loss detection: after 36 s detection time depends on jeweller settings
- Input monitoring: detection of wired connection loss, short circuits, and malfunctions when the eol, 2eol, or 3eol connection is used depends on the connection type.
- Battery: 2 × cr123a pre-installed
- Calculated battery life: up to 5 years
- Dimensions: 116 × 180 × 62 mm 4.57" × 7.09" × 2.44"
- Weight: 547 g 19.3 oz
- Operating temperature range: from 0 °c to +50 °c from 32 °f to 122 °f
- Operating humidity: up to 80%
- Protection class: ip21c
- Flammability rating: ul 94 v-0
- Color: white
- Complete set: en54 i/o module (2x2) jeweller 2 × cr123a battery (pre-installed) installation kit 2 × set of 4 eol resistors quick start guide
- Peso listino: 500 g
- Peso di spedizione con imballaggio: 0.700 kg