Tenda Switch Fibra PoE TEG1009P-EI

Il TEG1009P-EI POE o Power Over Ethernet è un accessorio per Router, Modem e altri prodotti dotati di presa di rete LAN: serve a miscelare l'alimentazione sul cavo Ethernet di collegamento, in modo da posizionare l'alimentatore 220Volt a distanza, laddove è comoda la presa di corrente.

E possibile collegare sino a 8 dispositivi con il POE per alimentare Access Point, Antenne Wifi, Telecamere IP, e altri dispositivi posti all'esterno: in questo caso l'alimentatore di corrente viene inserito in una presa di casa, al riparo dagli agenti atmosferici.


Compliant with IEEE802.3, IEEE802.3u, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at
1-8 ports support PoE AF/AT, wire-speed forwarding on each port
Backplane broadband up to 18Gbps, packet forwarding rate up to 13.4Mpps, and supports non-blocking wire-speed forwarding
Provides 9 10/100/1000Mbps auto-sensing RJ45 ports, support parallel-line and cross-line auto-detection (Auto MDI/MDIX)
Integrates with professional lightning-proof curcuit, supports 2-level lightning -proof for uplink port
4K MAC address list with adress learning and aging
 

Specification

Technical Specs
Standard&Protocol    IEEE 802.3、IEEE 802.3u、IEEE 802.3x、IEEE 802.3af、IEEE 802.3at
Port Description    Support IEEE802.3x flow control (half/full duplex)
Eight 10/100/1000BASE-TX PoE port
One 10/100/1000BASE-TX uplink port
Port Features    Support IEEE802.3x flow control (half/full duplex)
Support port-based broadcast storm control
Support pps-based broadcast storm control
Switching Capacity    Backplane Bandwidth 18Gbps
Packet Forwarding Rate 13.4Mpps
Full duplex on each port
MAC Adress Table    4k
Switching Mode    Storage & forward
Power    DC Input
Power Consumption: <127.5W
Maximum PoE Output Power: 121.2W
Power Module    PoE 802.3af(15.4W)/802.3at（30W）
Dimensions(L×W×H )    235mm*103mm*27mm
Weight    <5kg
WorkingTemperature    0℃～45℃
Working Humidity    10%～90%（Non condensing)